| Form Factor | 
Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters
[6.7 inches] x 170.18 millimeters [6.7 inches]) | 
| Processor Chipset | 
Intel Pentium N3710 Processor with integrated graphics | 
| Memory | 
Support for dual channel DDR3L 1066/1333 SO-DIMMs
  | 
| 
                        	Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM)                        
  | 
| 
204-pin DDR3L SO-DIMM
  | 
2 | 
| Graphics | 
                    		Integrated graphics:                       
  | 
| 
Digital displays (HD-Out)
  | 
| 
Analog displays (VGA)
  | 
| 
Internal flat panel displays:
  | 
| 
LVDS
  | 
| 
Embedded DisplayPort* eDP*
  | 
| 
External graphics support via a PCI Express 1.0a x1 graphics add-in card connector
  | 
| Audio | 
2 + 2 Channel High Definition Audio ( HD Audio) using a Realtek* ALC888S audio codec supporting:                                
  | 
| 
Analog stereo line-out (back panel jack)
  | 
| 
In-chassis stereo speakers support (3 W/3 Ω via an internal header)
  | 
| Expansion Capability | 
PCI Express x1 add-in card connector
  | 
1 | 
| 
PCI Express Full-/Half-Mini Card slot
  | 
1 | 
| 
PCI Express Half-Mini Card slot
  | 
1 | 
| Peripheral Interfaces | 
USB 2.0 front panel ports
  | 
5 (Headers) | 
| 
USB 3.0 back panel connectors (blue)
  | 
4 | 
| 
SATA 3.0 Gb/s
  | 
2 | 
| 
SATA 3.0 Gb/s port (multiplexed with an mSATA port, routed to the PCI Express Full-/Half-Mini Card slot)
  | 
1 | 
| Legacy I/O | 
Legacy I/O Controller (NCT6683D) that provides:                        
  | 
| 
Powered RS232
  | 
2 | 
| 
Parallel port via an onboard header
  | 
1 | 
| LAN Support | 
                Realtek RTL8111G-CG Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs                 | 
| BIOS | 
BIOS resident in a Serial Peripheral Interface (SPI) Flash device
  | 
| 
Support for Advanced Configuration and Power Interface (ACPI), and System Management BIOS (SMBIOS)
  | 
| Hardware Management | 
                	Nuvoton NCT6104D based subsystem, including:                 | 
| 
Voltage sense to detect out of range power supply voltages
  | 
| 
Thermal sense to detect out of range thermal values
  | 
| 
3-pin system fan header
  | 
| Power Requirement | 
DC connectivity via back-panel DC jack(2.5mm/ ID, 5.5mm/ OD)
  | 
| 
Internal 2 pin power connector
  | 
| Environment | 
Operating Temperature: 0°C to +60°C
  | 
| 
Storage Temperature: -20°C to +70°C
  | 
| Safety | 
CE
  | 
| 
FCC |