Cooler Master S1N-83CCS-06-GP 775 1.5U Cooler
Application System: 1.5U Form Factor Active Solution
CPU Type: Intel P4 ( Prescoot, Cedar Mill )/ Pentium D ( Smithfield, Presler )
Supported CPU Frequency 2.8~ 3.8 GHz up for Pentium 4; FSB 800 MHz up
2.8~ 3.4 GHz up for Pentium D; FSB 800 MHz up
Socket Type: LGA 775
Heat Sink: Copper Base + Copper Stacked Fin
Cooler Dimension: 97 x 97 x 29.5 mm
Fastener: Screw + Spring
Interface Material: Shin Etsu 7783
Fan Dimension: 80 x 80 x 15 mm
Fan Speed: 4,000 rpm
Fan Airflow: 42.7 CFM
Fan Bearing Type: Dual Ball Bearing
Voltage Rating: 12 V
Noise Level: 42.5 dBA
Connector: 3 Pins (Speed detection)
Back Plate: EBP-N775 (Optional)
Thermal Resistance: 0.45 °C/W for Pentium 4 / 0.33 °C/W for Pentium D
Scope of supply :
- Coolermaster S1N-83CCS-06-GP heatsink with fan
- Installation metal cross for mainboard rear side + buffer rubbers
Please
login for creating product ratings.
Your rating:
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.
Customer ratings:
Average rating, based on 12 ratings
|
I had plans to use it with Core 2 Quad Q9550 but it is small for that purpose. TDP 95W seems to be too much for this cooler. When the CPU load is at 100% for all of the cores within one minute the temperature rises up to 65 degrees C.
The mounting is properly done and the thermal contact is perfect, room temperature - 22 degrees C.
The cooler is great but for 65W TDP processors i guess.