M3-ATX 6-24V DC/DC (125 Watt) [picoPSU-format !]

3D 360° View

Like M2-ATX, but smaller !
Shutdown controller
Automotive ATX PSU
Survives engine cranks

69.95 EUR
incl. 19% VAT, plus shipping
In Stock (279 pcs)
5 von 5 Sternen

107 ratings

M3-ATX is an intelligent vehicle ATX power supply. Designed to provide power and to control the ON/OFF switch of a motherboard based on ignition status, M3-ATX is a wide input (6-24V) ATX power supply capable of surviving tough engine cranks (down to 5.7V) as well as transient over-voltage situations.

M3-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown timing schemes. By removing all user-selectable jumpers, M3-ATX becomes a traditional PSU with no ignition control and it can be used in non-vehicle applications.

Even if your computer is totally OFF, a PC will still consume few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts. No matter how big your battery is, it will eventually drain your battery in a matter of days.

While in deep sleep mode, M3-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down until battery levels reach safe levels again.

No more dead batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M3-ATX the premier solution for ATX vehicle power supply solutions.

M3-ATX comes equipped with ATX, HDD and Floppy cable harness, jumpers, faston connectors and 2 pin cables for motherboard ON/OFF switch. Just connect it to your 12V car / boat / RV battery and power up your PC.

Working from 8V Power input (6V for short time) !

The M3-ATX also is capable for P4(M)- and AMD-systems.
Scope of Supply:
- M3-ATX PSU
- Cable for mainboard (Remote-PowerOn)
- 3x cables f. Plus, Ignition Plus, Ground (Minus)

Data sheet	Download (PDF)
Data sheet	Print view
Manual [EN]	Download (PDF)
Manual [DE]	Download
Programming	Download

Please login for creating product ratings.

Your rating:

Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating. If you want you also can leave a comment.

Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And you can benefit from reports other customers are giving.

In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters) on your account. The credit will be substracted automatically on your next order !

We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders). "Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.

Customer ratings: Average rating, based on 107 ratings

from meisteru am 23.09.2008

Soweit super Netzteil, doch leider funktioniert die Ansteuerung des Autoverstärkers nicht wie beschrieben. Der Verstärker wird nach dem Herunterfahren des Computers noch einmal eingeschaltet, was einen zusätzlichen Knall in den Lautsprechern verursacht. Suport weiß bescheid kann aber nicht tun. :-(

from ice-tea am 23.09.2008 |

| See all my comments

wirklich feines kleines netzteil mit genügend power für einen 10,4" touchscreen (ca12w), einen E2200 (leicht geclockt(ca70w)), ein intel DG45FC board, 4gb corsaire 800mhz cl4 speicher und eine 250gb WD platte.... habe alles mit ein wenig aufwand in ein aopen s-120a verbaut bekommen sodass wirklich alles innerhalb des cases liegt... leider fehlen diverse kabel zum netzteil die man sich für teuer geld einzeln noch dazubestellen musss oder halt einfach selber baut...
fazit: viel leistung für einen angemessenen preis bei relativ geringer wärmeentwicklung, leider wenig zubehör wie kabel usw!

from TheMartel am 23.08.2008 | See all my comments

Excellente alimentation a connecter directement a sa batterie, elle permet a travers ces nombreuses option un contrôle précis de son pc embarqué, evite de s'encombrer avec de la connectique inutile.

from wurmthomas am 25.08.2008 |

Funktioniert einwandfrei!

from Invexis am 03.09.2008 |

| See all my comments

Der Hammer! 125-Watt aus einem so kleinen Bauteil. Versorgt auch große Boards mit der nötigen Leistung und hat dazu noch viele mehr Features. Vorallem die Intelligente Steuerung macht das Handling besonders einfach. Auch werden bereits die Anschlüsse für die Versorgung von Festplatten mit Strom mitgeliefert. Der Preis ist zwar schon höher, es lohnt sich aber allemal!