CarTFT.com
SFX / ATX Enclosure f. M4-ATX
PRODUCT IS CURRENTLY NOT AVAILABLE !
- SFX formfactor !
- ATX adapter included !
This enclosure meets the SFX formfactor. An adapter-plate for ATX is included aswell.
A 60x60x25mm fan (power connectors : open lices. Needs to be soldered.) is in scope of supply, but in most cases will not be needed as M4-ATX can be operated fanless.
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.
Customer ratings:
 Average rating, based on 22 ratings |
from smarteyejonas am 23.09.2015
| 
| See all my comments
from Portendo am 24.10.2012
|
| See all my comments
Seems to do what it is intended for. We would maybe have expected a connector for the fan wire pair, not only two bare ends
from pccarluca am 07.09.2012
|
| See all my comments
ottimo box di contenimento e raffreddamento alimentatore m4-atx
Update from :2012-09-07 20:05
ottimo box di contenimento e raffreddamento alimentatore m4-atx
Update from :2012-09-07 20:05
ottimo box di contenimento e raffreddamento alimentatore m4-atx
from ronbrin am 25.07.2011
|
| See all my comments
Excellent addition to the PSU. Build quality is good with no sharp edges.
The M4-ATX does not really need the included cooling fan but comes in handy in my setup anyway: PSU is mounted inside the dash board and behind the touch screen. The PSU cooling fan also cools the screen from the back.
Only negatives I can think off: Cooling fan (if used at all) does not come with a connector attached. Soldering an extension wire with connector or directly to the pin header is needed.